Honeywell W7220-PCMOD PC interface module. Honeywell's W7220-PCMOD is an integrated tool and software program created to assist in energy savings, validation and verification of the operation of the economizer in a rooftop unit.
Honeywell's W7220-PCMOD tool and software is used with the JADE economizer to provide a low-cost, simple-to-use information and logging solution for light commercial buildings. It saves time for the service technician by providing the ability to perform various checkout functions and adjust controller module settings using a personal computer in the field.
In addition, W7220-PCMOD allows contractor personnel to pre-configure a number of JADE controllers in the office, therefore saving the installation technicians time on the rooftop.
The W7220-PCMOD logging option for long term recording allows building owners and contractors to verify energy savings and validate that the economizer system is working.
Components required for set up include:
A personal computer, with Windows XP, Windows 7 or Windows Vista
A USB cable to connect the PC Module to the computer (provided)
Two wires to connect the PC Module to the JADE controller module
Free W7220-PCMOD software is available for download at www.customer.honeywell.com/economizertools. Please use the password "password" to download the tool.
Description: W7220-PCMOD interface module used with JADE (W7220A1000) and Personal Computer
Output: USB connection to a personal computer
Input: Sylk bus communication to JADE (W7220A1000)
Voltage: 12-30 VAC
Frequency: 60 Hz/50Hz
Operating Temperature Range (F): -40 F to -150 F
Operating Temperature Range (C): -40 C to +65 C
Operating Humidity Range (% RH): 5 to 95% RH, non-condensing
Dimensions (in.): 4.98 inches high x 6.3 inches wide x 1.34 inches deep
Dimensions (mm): 126.4 mm high x 160 mm wide x 34mm deep
Approvals, Underwriters Laboratories Inc: FCC Compliant
Approvals, Underwriters Laboratories Inc: UL94-5V
Approvals, Underwriters Laboratories Inc: CE
Approvals, Underwriters Laboratories Inc: C-tick
Approvals, Others: Complies with California Title 24
Used With: JADE (W7220A1000)
PC Interface Module Installation Instructions:
1. Download PC tool software to your desktop. For instructions
contact your local distributor or Honeywell hot line
2. Connect W7220-PCMOD interface module to your computer
3. Power the Sylk device
4. Start configuration tool
5. Choose a correct port on your computer:
Press Windows key and the Pause key at the same time
Click Device Manager that appears on the left side of the screen (if
using Windows XP the System properties window will appear, click on
hardware then device manager)
Click Ports from Device window pop up
Choose Com port: TUSB3410